AT2 ULTRA

Motor Brackets
Motor Spline Adapter
Accessories

0 Implement Guidance (Path Assist) "Path Assist" Is a secondary receiver, placed on the implement, for instance an air drill, it then allows the GPS system to place the implement on the line, instead of the tractor. Accounting for side-hill drift, long implements, draft, and uneven operating conditions. It also gives the option to use NMEA positioning data from the secondary receiver - meaning your sectional control will be based on the actual position of the drill, instead of the estimated position based on tractor location. PathAssist is compatible with all steering systems except AT2Lite. Add to cart 3,675.00 $ 3675.0 CAD	0 FjDynamics Coverage Recording Switch The FjDynamics Acre Recording Switch mounts to your implement, and senses it's position to enable and disable automatic coverage on the screen. This unit is ideal in cases where there is no electronic control for enabling or disabling coverage logging using electronic means. Add to cart 525.00 $ 525.0 CAD	0 Machine CAN Data Connector (WiFi-OBD Module) The FjDynamics WiFi OBD module allows for the machine to seamlessly communicate with the FjDynamics autosteering system already installed. This allows for critical information such as service codes, engine RPM, engine load, working rate, etc. to be shown on the FJD Display, and, in addition, logged to the FarmFusion Farm Management platform... This data can also be sent to the FjDynamics App on mobile devices, so you always know what's going on with machines in the field. Add to cart 505.25 $ 505.25 CAD	0 FjDynamics Wireless Camera (Power from 12v Source) The FjDynamics Wireless Camera allows for crystal-clear High Definition streaming back to any FJ display. Up to two cameras are supported at any given time. The cameras come with a 7M (22ft) power cord, and support up to a 20M (80ft) transmission distance. Extra cabling is available. Add to cart 375.00 $ 375.0 CAD
0 FjDynamics Wireless Camera (Power from FJD Harness) The FjDynamics Wireless Camera allows for crystal-clear High Definition streaming back to any FJ display. Up to two cameras are supported at any given time. The cameras come with a 7M (22ft) power cord, and support up to a 20M (80ft) transmission distance. Extra cabling is available. Add to cart 375.00 $ 375.0 CAD	0 FjDynamics Easy Switch /w Foot Pedal (ES1-F) The Easy-Switch Is a foot & push button accessory which allows you to engage and disengage your autosteer system without needing to touch the screen. This kit includes the accessory harness, the foot switch, and the push button. You can use either, or both as necessary in your application. Add to cart 318.50 $ 318.5 CAD	0 FjDynamics Wired Camera The FjDynamics Wired camera provides a reliable, crystal clear picture to the FJD monitor; designed to connect through the already existing plug on the FJD display's accessory harness, this camera provides power and signal through one, shielded harness. Monitors support up to two cameras. Add to cart 285.00 $ 285.0 CAD	0 #6 Advanced Motor Bracket Universal Mounting Bracket. This bracket fits the majority of equipment and combines functionality of brackets 1-5. Add to cart 210.00 $ 210.0 CAD
0 FjDynamics Easy Switch (ES1) The EasySwitch is a Push-Button switch which can be integrated into the armrest, joystick, or console of a machine to allow for rapid, easy engagement of the autosteer without the use of the touch screen. Add to cart 209.00 $ 209.0 CAD	0 #4 Motor Bracket Extension shaft clamping motor bracket Add to cart 184.00 $ 184.0 CAD	0 FjDynamics Coverage Recording Harness The FjDynamics Acre Recording Harness ties into existing relays or switches to enable automatic coverage logging based on electronic signals. Add to cart 129.75 $ 129.75 CAD	0 #20 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #20 Hub. Splines: 48 Diameter: 19.3mm Height: 75mm Fits: JCB 3170, 3190, and Fastrac series. Add to cart 112.00 $ 112.0 CAD
0 #19 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: 36 Diameter: 17.775mm Height: 75mm Fits: Challenger: A, B, C, D, E series two-digit tractors (E.G. 65, 75, 85) SOME Steiger 9100, 9200, 9300 series tractors Add to cart 112.00 $ 112.0 CAD	0 #18 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #18 Hub. Splines: 40 Diameter: 17.704 mm Height: 75 mm Fits: New Holland T5, TM, TL, and TS Series Tractors CaseIH MXM, JXU, Farmall series Add to cart 112.00 $ 112.0 CAD	0 #14 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #14 Hub. Splines: 36 Diameter: 15.697mm Height: 75mm Fits: Challenger: MT, MT-A, MT-B, MT-C, MT-D, MT-E 400, 500, 600 Series tractors Massey Ferguson: 5-, 6-, 7-, and 8- series tractors Claas: Arion 500 and 600 series; Axion 800 Series. Add to cart 112.00 $ 112.0 CAD	0 CHDP-1 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the a custom manufactured special hub. Splines: 0 - round hole. Diameter: 0.75" Height: 125mm Fits: Macdon, Prairie Star, Westward Swathers, 8, 9 series, and M-150 and early M155's with a round 3/4" shaft, with a roll pin hole. Add to cart 112.00 $ 112.0 CAD
0 #13 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: 36 Diameter: 20.3 mm Height: 75mm Fits: Fendt 200, 300, 400, 500, 700, 800, 900 Vario and older tractors Deutz 7 Series, M Series, TTV Series, and 265 Case IH CVX Series Add to cart 112.00 $ 112.0 CAD	0 #24 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: None; Keyed Shaft, 5mm key. Diameter: 24.35 mm Height: 75mm Fits: Claas Lexion, Tucano, Dominator combines. Add to cart 112.00 $ 112.0 CAD	0 #57 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #57 Hub. Splines: 32 Diameter: 28mm Height: 75 mm Fits: Willmar and Spra-Coupe Sprayers Add to cart 112.00 $ 112.0 CAD	0 #15 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #15 Hub. Splines: 36 Diameter: 15.875mm Height: 125mm Fits: Case IH and New Holland 4WD and large frame FWA tractors, among others. Add to cart 112.00 $ 112.0 CAD