• AT2 - Electric Wheel
  • AG1 - Guidance Only
  • ISOBus
    0
FjDynamics AT2 Autosteer Kit
The AT2 Autosteer system by FjDynamics is a powerful system capable of steering any vehicle which currently has a steering wheel. The system consists of a roof-mounted Smart Receiver, a Steering wheel unit which replaces the factory steering wheel and a 10.1" high-visibility touch screen display.
With many splines and brackets available, this system can be customized to fit anything from Swathers and Tractors to Combines and Sprayers.
9,399.00 $ 8,500.00 $ 8500.0 CAD
    0
FjDynamics AT2 Pro Autosteer Kit
The FjDynamics AT2 Pro Is the same product as the AT2, except the receiver is upgraded to allow its use with PTx Trimble's CenterPoint and Rangepoint RTX correction services. These services have an annual fee. More information can be found on our website under Sales / Correction Services.
The AT2Pro is a powerful system capable of steering any vehicle which currently has a steering wheel. The system consists of a roof-mounted Smart Receiver, a Steering wheel unit which replaces the factory steering wheel and a 10.1" high-visibility touch screen display.
With many splines and brackets available, this system can be customized to fit anything from Swathers and Tractors to Combines and Sprayers.
10,935.00 $ 9,999.00 $ 9999.0 CAD
    0
FjDynamics AT2 Completions Kit
This completions kit allows you to move your FjDynamics AT2 or AT2Pro to a different machine.
It includes all the harnessing, brackets, a steering wheel motor, steering wheel, and mounting hardware for the machine. Once installed, you simply move your receiver and monitor to the next machine.
4,489.50 $ 4489.5 CAD
    0
FjDynamics Easy Control
The FjDynamics Easy Control remote is a Bluetooth-Enabled remote control allowing for easy Engagement and management of the autosteer system without having to use the touch screen.
449.95 $ 449.95 CAD
    0
FjDynamics AG1 Guidance System
The FjDynamics' AG1 Guidance system is a simple, light-bar & guidance only solution for coverage mapping. It can be expanded for use with ISOBUS with the appropriate accessory harness, and it can also be used as a dual-screen solution for the A*2 line of steering systems.
3,400.00 $ 3,100.00 $ 3100.0 CAD
    0
FjDynamics Easy Switch /w Foot Pedal (ES1-F)
The Easy-Switch Is a foot & push button accessory which allows you to engage and disengage your autosteer system without needing to touch the screen.
This kit includes the accessory harness, the foot switch, and the push button. You can use either, or both as necessary in your application.
318.50 $ 318.5 CAD
    0
FjDynamics Easy Switch (ES1)
The EasySwitch is a Push-Button switch which can be integrated into the armrest, joystick, or console of a machine to allow for rapid, easy engagement of the autosteer without the use of the touch screen.
209.00 $ 209.0 CAD
    0
FjDynamics NMEA-Out Harness
This harness allows GPS NMEA data to be output from FjDynamics' autosteer systems into other controllers... I.E. for Air-drills, Planters, Sprayers, etc.
Connector is standard 9-pin serial.
108.00 $ 108.0 CAD
    0
FjDynamics Radar Output Harness
The Radar-Out harness allows you to send square-wave radar speed signals to either an aftermarket rate controller, or the machine's built in computer, replacing the bulky radar attached to the unit.
212.00 $ 212.0 CAD
    0
FjDynamics ISOBus Kit
The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required.
1,499.00 $ 1499.0 CAD
    0
FjDynamics Wireless Camera
The FjDynamics Wireless Camera allows for crystal-clear High Definition streaming back to any FJ display. Up to two cameras are supported at any given time.
The cameras come with a 7M (22ft) power cord, and support up to a 20M (80ft) transmission distance. Extra cabling is available.
375.00 $ 375.0 CAD

To install this Web App in your ISO device press and then Add to Home Screen.